Chattanoogo Freethought Association key chain
About the design
This is the logo for Chattanooga Freethought Association, out of Chattanooga, Tennessee, USA. The back of the keychain is blank.
About the key chains
Each one is hand made, a block of polymer clay approximately 1-1/2" x 1-1/2" x 3/8" (3.81 x 3.81 x 0.9525 cm) - this will vary slightly with each one. It is currently available with a snake keychain, a split ring keyring version will be available once I find a chain I approve of.
I make these key chains by hand. I form a ring from heavy guage wire and snake it inside of some thick layers of polymer clay that I've mixed to look like stone. After I've baked the clay, I sand it to smooth things out a bit and round off the edges. I then apply the design and cover the block with matte medium gel. This helps eliminate any halo effects and gives it a nice flat finish. After applying a few layers of the matte medium gel, I make a dome of epoxy resin over the front of the block and allow it to cure for 48 hours or so. Once the resin has cured, I apply a coat or two of polymer clay safe UV blocking protective sealant, this gives it a nice feel and helps prevent it from getting dirty in your pockets (and easy to clean if something dirty does get on it). Finally, I attach the key chain to the ring that I placed in the block prior to baking it.
Each keychain is made by hand upon request and can take up to seven days to get out to you (though generally it will take less time.).
|Bulk Buying Options|
|2 up to 10|| ||$8.45||per item|
|11 up to 99|| ||$6.95||per item|